Sony DSX-M50BT Manuel
29
GB
During playback or reception, the
demonstration mode starts.
If no operation is performed for 5 minutes
demonstration mode starts.
If no operation is performed for 5 minutes
The display disappears from/does not appear
in the display window.
The dimmer is set to [DIM-ON] (page 21).
The display disappears if you press and hold
in the display window.
The dimmer is set to [DIM-ON] (page 21).
The display disappears if you press and hold
OFF.
Press OFF on the unit until the display
Press OFF on the unit until the display
appears.
The connectors are dirty (page 25).
Radio reception
Stations cannot be received.
The sound is hampered by noises.
The connection is not correct.
The sound is hampered by noises.
The connection is not correct.
If your boat has built-in radio antenna
(aerial) in the rear/side glass, connect an
REM OUT lead (blue/white striped) or
accessory power supply lead (red) to the
power supply lead of a boat’s antenna
(aerial) booster.
REM OUT lead (blue/white striped) or
accessory power supply lead (red) to the
power supply lead of a boat’s antenna
(aerial) booster.
Check the connection of the boat antenna
(aerial).
If the auto antenna (aerial) will not extend,
check the connection of the power
antenna (aerial) control lead.
antenna (aerial) control lead.
The tuning step setting has been erased.
Set the tuning step again (page 10).
Preset tuning is not possible.
The broadcast signal is too weak.
The broadcast signal is too weak.
RDS
PTY displays [- - - - - - - -].
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program
type.
USB playback
You cannot play back items via a USB hub.
This unit cannot recognize USB devices via a
This unit cannot recognize USB devices via a
USB hub.
A USB device takes longer to play back.
The USB device contains files with a
The USB device contains files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high-bit-
The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
BLUETOOTH function
The connecting device cannot detect this unit.
Before the pairing is made, set this unit to
Before the pairing is made, set this unit to
pairing standby mode.
While connected to a BLUETOOTH device, this
unit cannot be detected from another device.
Disconnect the current connection and
Disconnect the current connection and
search for this unit from another device.
When the device pairing is made, set the
BLUETOOTH signal output to on (page 11).
Connection is not possible.
The connection is controlled from one side
The connection is controlled from one side
(this unit or BLUETOOTH device), but not
both.
Connect to this unit from a BLUETOOTH
both.
Connect to this unit from a BLUETOOTH
device or vice versa.