Sony SRS-DB500 Manuel D’Utilisation
16
US
Troubleshooting
Should you encounter a problem with
your speaker system, check the following
list and take the indicated measures. If the
problem persists, consult your nearest
Sony dealer.
your speaker system, check the following
list and take the indicated measures. If the
problem persists, consult your nearest
Sony dealer.
General
There is no sound.
• Turn JOG clockwise (or press
VOLUME + on the remote).
• Turn up the volume on the connected
device.
• Check that headphones are not
connected.
• Check the speaker connections.
• Make sure the muting function is turned
• Make sure the muting function is turned
off.
• Check that you have selected the correct
device with the INPUT button.
The sound is distorted.
• Turn JOG counterclockwise.
• Turn down the volume level on the
• Turn down the volume level on the
connected device. Or, if the connected
device has a BASS BOOST function,
set it to off.
device has a BASS BOOST function,
set it to off.
There is hum or noise in the speaker
output.
output.
• Make sure all the connections have been
correctly made.
• Make sure the connected device are not
positioned too close to the TV set or
monitor.
monitor.
The sound has suddenly stopped.
• Make sure all the connections have been
correctly made.
• Make sure the muting function is turned
off.
There is no sound output from the
headphone.
headphone.
• Check the headphone connection.
• Check that the audio source on the
• Check that the audio source on the
selected channel is played back.
• Make sure the muting function is turned
off.
The remote does not function.
• Remove the obstacles between the
remote and the unit.
• Move the remote closer to the unit.
• Point the remote at the unit’s sensor.
• Replace the batteries.
• Move the unit away from the
• Point the remote at the unit’s sensor.
• Replace the batteries.
• Move the unit away from the
fluorescent light.
Additional Information
When the "/1 indicator flashes
Immediately unplug the power cord,
and check the following items.
• Are you using only the supplied
Immediately unplug the power cord,
and check the following items.
• Are you using only the supplied
speakers?
• Are the + and – speaker cords
short-circuited?
• Is anything blocking the ventilation
holes on the rear of the subwoofer
unit?
unit?
After checking the above items
and fixing any problems, wait for
5 minutes before plug in the power
cord again and turn on the system. If
the "/1 indicator still flashes, or if the
cause of the problem cannot be found
even after checking all the above
items, consult your nearest Sony
dealer.
and fixing any problems, wait for
5 minutes before plug in the power
cord again and turn on the system. If
the "/1 indicator still flashes, or if the
cause of the problem cannot be found
even after checking all the above
items, consult your nearest Sony
dealer.