Sony SU-XFQ005 Manuel
8
(US)
4
Use the cable clamps to hold the
cables in place. Unsnap the
clamps and thread the AC power
cord and display interface cable
as shown.
cables in place. Unsnap the
clamps and thread the AC power
cord and display interface cable
as shown.
Cable clamp
Cable
Pinch the cable clamps and push against
the inserted cables to snap in.
the inserted cables to snap in.
Safety measures to
prevent toppling over
prevent toppling over
WARNING
Be sure to take measures to prevent the Display
Unit from toppling over.
If you fail to do so, the Display Unit may topple
over and cause injury. Anchor the Display Unit to a
wall, pillar, etc., to prevent it from toppling over.
Unit from toppling over.
If you fail to do so, the Display Unit may topple
over and cause injury. Anchor the Display Unit to a
wall, pillar, etc., to prevent it from toppling over.
Prepare a commercially available strong rope or chain
and wall anchor bracket beforehand.
and wall anchor bracket beforehand.
1
Attach the two anchor
attachments to the upper free
screw holes on the rear of the
Display Unit.
attachments to the upper free
screw holes on the rear of the
Display Unit.
2
Secure the wall anchor bracket
to a solid wall or pillar.
to a solid wall or pillar.
Anchor
attachment
attachment