Sony ICD-SX700D Manuel
ICD-SX700 4-127-576-11(1)
0
GB
4
Press
or
to select “ON,”
then press
.
5
Press
(stop) to exit the menu
mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
Connect the audio output connector
(stereo mini-plug) of other equipment
to the
(microphone) jack of the IC
recorder using an audio connecting
cable*.
“SELECT INPUT” appears in the display
“SELECT INPUT” appears in the display
window.
7
Press
or
to select “AUDIO
IN,” then press
.
8
Press
(record/pause) to start
recording.
“
“
” flashes and the IC recorder
enters the recording pause mode.
9
Start playback on the component
connected to the IC recorder.
“
“
” appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and “
” flashes.
The IC recorder starts recording again as
a new message when sound is detected.
Notes
During synchronized recording, you cannot
divide a recording message (page 42), you
cannot pause recording (page 28), you
cannot record with the VOR function or
you cannot record with the pre-recording
function.
Depending on the equipment connected to
Depending on the equipment connected to
the IC recorder, the synchronized recording
function may not operate properly due to a
difference in the audio input level.