Manualsbrain.com
  1. Manuels
  2. Marques
  3. Sony
  4. BDP-S2500
  5. Manuel

Sony BDP-S2500 Manuel

Télécharger
Page de 40
29
BDP-S2500
4-577-202-11(1)
master page=right
E:\SONY
DVD\SD150010\4577202111_US\070ADD.fm
Additional Information
Additional Information
Troubleshooting
If you experience any of the following 
difficulties while using the player, use 
this troubleshooting guide to help 
remedy the problem before requesting 
repairs. Should any problem persist, 
consult your nearest Sony dealer.
There is no picture or the picture is 
not output correctly.
, Check that all the connecting cables 
, Switch the input selector on your TV 
to display the signal from the player.
, Reset the [Output Video Resolution] to 
the lowest resolution by pressing 
x STOP, HOME, and then POP UP/
MENU button on the remote.
, Try the following: 
1
Turn the player 
off and on again. 
2
Turn the connected 
equipment off and on again. 
3
Disconnect and then reconnect the 
HDMI cable.
, The HDMI OUT jack is connected to a 
DVI device that does not support 
copyright protection technology.
, Check the [Output Video Resolution] 
settings in [Screen Settings] (page 24).
, For BD ROMs/DVD ROMs/Data 
content/Network content, check the 
[24p Output] settings in [Screen 
Settings] (page 24).
The display language on the screen 
switches automatically when 
connected to the HDMI OUT jack. 
, When [Control for HDMI] in [HDMI 
Settings] is set to [On] (page 27), the 
display language on the screen 
automatically switches according to 
the language setting of the connected 
TV (if you change the setting on your 
TV, etc.).
There is no sound or the sound is not 
output correctly.
, Check that all the connecting cables 
are securely connected (page 15).
, Switch the input selector on your AV 
amplifier (receiver) so that the audio 
signals of the player are output from 
your AV amplifier (receiver).
, Check the audio settings (page 25).
, Try the following: 
1
Turn the player 
off and on again. 
2
Turn the connected 
equipment off and on again. 
3
Disconnect and then reconnect the 
HDMI cable.
, If the player is connected to a TV 
through an AV amplifier (receiver), try 
connecting the HDMI cable directly to 
the TV. Refer also to the instruction 
manual supplied with the AV amplifier 
(receiver).
, The HDMI OUT jack is connected to a 
DVI device (DVI jacks do not accept 
audio signals).
, The device connected to the HDMI 
OUT jack does not support the audio 
format of the player. Check the audio 
settings (page 25).
Picture
Sound