D-Link DFL-1600 Guide De Logiciel

2.3. Utility

2.3.1. ping

Ping host.

Description

Sends one or more ICMP ECHO, TCP SYN or UDP datagrams to the specified IP address of a host.
All datagrams are sent preloaded-style (all at once).

The data size

-length

given is the ICMP or UDP data size. 1472 bytes of ICMP data results in a

1500-byte IP datagram (1514 bytes ethernet).

Usage

ping <host> [-recvif=<interface>] [-srcip=<ip address>]

[-pbr=<table>] [-count=<1...10>] [-length=<4...8192>]
[-port=<0...65535>] [-udp] [-tcp] [-tos=<0...255>] [-verbose]

Options

-count=<1...10>

Number of packets to send. (Default: 1)

-length=<4...8192>

Packet size. (Default: 4)

-pbr=<table>

Route using PBR Table.

-port=<0...65535>

Destination port of UDP or TCP ping.

-recvif=<interface>

Pass packet through the rule set, simulating that the packet was re-
ceived by <recvif>.

-srcip=<ip address>

Use this source IP.

-tcp

Send TCP ping.

-tos=<0...255>

Type of service.

-udp

Send UDP ping.

-verbose

Verbose (more information).

<host>

IP address of host to ping.

2.3. Utility

Chapter 2. Command Reference