D-Link DSL-2500U_BRU Manuel D’Utilisation
4
Front Panel View
LED
Mode Indication
Solid
Green
Green
The router is powered on. (READY)
No light
The power is off.
Power
Solid Red Failure or device malfunction. (NOT READY)
Status
Blinking
Green
Green
Traffic is passing through the device. (INTERNET TRAFFIC)
Solid
Green
Green
DSL is synchronized.
No Light
No carrier signal.
Slow
Blinking
DSL attempting synch. Trying to detect carrier signal.
DSL
Fast
Blinking
Blinking
Carrier has been detected and modem is trying to train.
Solid
Green
Green
Powered device connected to associated port
Blinking
Green
LAN activity present (traffic in either direction).
LAN
No Light No activity, modem power off, no cable or no powered
device is connected to the LAN port.
Solid
Green
IP connected (device has a WAN IP address from IPCP or
DHCP and DSL is up or a static IP address is configured, PPP
negotiation has completed successfully (if used), and DSL is
negotiation has completed successfully (if used), and DSL is
up. (WAN IP AVAILABLE)
No Light
Modem power off, modem in bridge mode or ADSL
connection not present.
connection not present.
Internet
Solid Red
Device attempted to become IP connected and failed (no
DHCP response, no PPPoE response, PPPoE authentication
DHCP response, no PPPoE response, PPPoE authentication
failed, no IP address from IPCP, etc.). (WAN IP NOT
AVAILABLE)
AVAILABLE)