Nikon D4S Guide De Réglage Du Réseau
82
Manual Profile Creation
Follow the steps below to manually configure the camera for
connection to ftp and http servers. Note that changes to the
current profile will be lost if the camera is turned off during setup;
to prevent unexpected loss of power, use a fully-charged battery
or an optional AC adapter. If you are connecting to an ftp server
behind a firewall, you may also need to adjust firewall settings to
create exceptions for the ftp ports used by the camera (ports 21,
22, and 32768 through 61000).
connection to ftp and http servers. Note that changes to the
current profile will be lost if the camera is turned off during setup;
to prevent unexpected loss of power, use a fully-charged battery
or an optional AC adapter. If you are connecting to an ftp server
behind a firewall, you may also need to adjust firewall settings to
create exceptions for the ftp ports used by the camera (ports 21,
22, and 32768 through 61000).
1
Display network profiles.
Select Network in the setup menu, then
highlight Network settings and press
highlight Network settings and press
2
to display the profiles list and other
network settings.
network settings.
2
Select Create profile.
Highlight Create profile and press
2.
Note that if the list already contains nine
profiles, you will need to delete an
existing profile using the
profiles, you will need to delete an
existing profile using the
O (Q) button
before proceeding (
053).
3
Select Configure manually.
Highlight Configure manually and press
2.
2.