Nikon D7000 Manuel D’Utilisation

Page de 348
205
U
Select On to reduce barrel distortion when shooting with wide-
angle lenses and to reduce pin-cushion distortion when 
shooting with long lenses (note that the edges of the area 
visible in the viewfinder may be cropped out of the final 
photograph, and that the time needed to process photographs 
before recording begins may increase). This option is 
recommended only with type G and D lenses (PC, fisheye, and 
certain other lenses excluded); results are not guaranteed with 
other lenses.
If On is selected, photographs taken at shutter speeds slower 
than 1 s will be processed to reduce noise (randomly-spaced 
bright pixels or fog), increasing the time required to record 
images by roughly 1.5 to 2 times. During processing, “
l m” 
will blink in the shutter speed/aperture displays and pictures 
can not be taken (if the camera is turned off before processing is 
complete, the picture will be saved but noise reduction will not 
be performed). In continuous release mode, frame rates will 
slow and while photographs are being processed, the capacity 
of the memory buffer will drop.
Photographs taken at high ISO sensitivities can be processed to reduce “noise.”
Auto Distortion Control
G button
➜ C shooting menu
A
Retouch: Distortion Control
For information on creating copies of existing photographs with reduced barrel and pin-
cushion distortion, see page 261.
Long Exp. NR (Long Exposure Noise Reduction)
G button
➜ C shooting menu
High ISO NR
G button
➜ C shooting menu
Option
Description
High
Reduce noise (randomly-spaced bright pixels, lines, or fog), particularly in 
photographs taken at high ISO sensitivities. Choose the amount of noise 
reduction performed from HighNormal, and Low.
Normal
Low
Off
Noise reduction is only performed at ISO sensitivities of ISO 1600 and higher. 
The amount of noise reduction is less than the amount performed when Low 
is selected for High ISO NR.