Nikon D7000 Manuel D’Utilisation

223

U

❚❚Flash Control at 1/320 s (Auto FP)

When 1/320 s (Auto FP) is selected for Custom Setting e1 (Flash sync speed, 
0 222), the built-in flash can be used at shutter speeds as fast as 

1

/

320

s, while 

optional SB-900, SB-800, SB-700, SB-600, and SB-R200 flash units can be used at any 
shutter speed (Auto FP High-Speed Sync).

This option determines the slowest shutter speed available 
when front- or rear-curtain sync or red-eye reduction is used in 
mode P or A (regardless of the setting chosen, shutter speeds 
can be as slow as 30 s in S and M modes or at flash settings of 
slow sync, slow rear-curtain sync, or red-eye reduction with slow 
sync). Options range from 

1

/

60

s (1/60 s) to 30 s (30 s).

Choose the flash mode for the built-in flash.

1

/

8,000

–

1

/

320

s

—

Auto FP

—

Auto FP

—

—

1

/

320

–

1

/

250

s

Flash sync

*

—

Auto FP

—

—

1

/

250

–30 s

Flash sync

* Flash range drops as shutter speed increases.  Flash range will nevertheless be greater than 

that obtained at the same speeds with Auto FP.

D

When the flash fires at full power, the flash-indicator in the camera viewfinder will blink to 
warn that the resulting photograph may be underexposed. Note that the flash-ready 
indicators on optional flash units will not display this warning when 1/320 s (Auto FP) is 
selected.

G button

➜ A Custom Settings menu

G button

➜ A Custom Settings menu

1 TTL

Flash output is adjusted automatically in response to shooting 
conditions.

2 Manual

Choose the flash level (

0 224). The camera does not emit monitor pre-

flashes.

3 Repeating flash

The flash fires repeatedly while the shutter is open, producing a strobe-
light effect (

0 224).

4 Commander mode

Use the built-in flash as a master flash controlling one or more remote 
optional flash units (

0 225).