Nikon D7200 Mode D'Emploi
170 Technical Notes
Copying Pictures to the Computer
Before proceeding, be sure you have installed ViewNX-i (
0 169).
1
Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect the supplied USB cable as shown
and then turn the camera on.
After turning the camera off and ensuring that a memory
card is inserted, connect the supplied USB cable as shown
and then turn the camera on.
A
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
battery is fully charged.
A
Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables. Do not use force or attempt to insert the
connectors at an angle.
interface cables. Do not use force or attempt to insert the
connectors at an angle.
D
During Transfer
Do not turn the camera off or disconnect the USB cable while
transfer is in progress.
transfer is in progress.
D
USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
cable via a USB hub or keyboard.