Nikon D5300 Guide D’Exploitation

200

Press the shutter-release button the rest of the way down to acquire Image Dust 
Off reference data.

If the reference object is too bright or too dark, 
the camera may be unable to acquire Image Dust 
Off reference data and the message shown at 
right will be displayed. Choose another reference 
object and repeat the process from step 1.

Reduce flicker and banding when shooting under fluorescent or mercury-vapor 
lighting during live view (

0 118) or movie recording (0 126). Choose Auto to allow 

the camera to automatically choose the correct frequency, or manually match the 
frequency to that of the local AC power supply.

D

The same reference data can be used for photographs taken with 
different lenses or at different apertures. Reference images can not 
be viewed using computer imaging software. A grid pattern is 
displayed when reference images are viewed on the camera.

G button

➜ B setup menu

A

If Auto fails to produce the desired results and you are unsure as to the frequency of the local 
power supply, test both options and choose the one that produces the best results. Flicker 
reduction may not produce the desired results if the subject is very bright, in which case you 
should select mode A or M and choose a smaller aperture (higher f-number) before starting 
live view. Note that flicker reduction is not available when On is selected for Movie settings 
> Manual movie settings (

0 129) in mode M.