Nikon D5300 Guide D’Exploitation
76
Track Logs
The built in location data unit can log information on the camera’s current position
(latitude, longitude, altitude) and the current time (UTC) as provided by satellite
navigation systems. Location data are recorded automatically at preset intervals and
saved to a track log file stored separately from the pictures taken with the camera.
The supplied ViewNX 2 software (
(latitude, longitude, altitude) and the current time (UTC) as provided by satellite
navigation systems. Location data are recorded automatically at preset intervals and
saved to a track log file stored separately from the pictures taken with the camera.
The supplied ViewNX 2 software (
0 154) can then be used to view the track on a
map.
1
Select On for Record location Data.
Press the
G button to display the menus
and select Location data > Record location
data in the setup menu. Highlight On and
press
data in the setup menu. Highlight On and
press
J.
2
Select Create log.
Highlight Create log and press
2.
3
Choose the log interval and log length.
Highlight Log interval (s) and press
4 or 2
to choose how often the camera logs
location data (the log interval, in seconds),
then highlight Log length (h) and press
location data (the log interval, in seconds),
then highlight Log length (h) and press
4 or
2 to choose how long (in hours) the log will
continue.
continue.
4
Start the log.
Highlight Log location data and press
2,
then highlight Start and press
J. Location
data will be logged at the interval and for the
period chosen in Step 3. The time remaining
is shown in the Location data display. Note
that location data will be logged even when
the standby timer has expired or the camera
is off, increasing the drain on the battery.
period chosen in Step 3. The time remaining
is shown in the Location data display. Note
that location data will be logged even when
the standby timer has expired or the camera
is off, increasing the drain on the battery.
G button