Nikon R1C1 Manuel D’Utilisation

83

z

Det

ails o

n Commander fla

s

h 

operation and shooting pro

c

edures

Set up the Commander and remote flash units in the same way as in “Flash 
operation using the Nikon Close-up Speedlight Commander Kit R1C1” (p. 38).

The following items can be set in Commander flash operation.

• Flash mode of remote flash units (TTL, Auto Aperture flash (AA), M, --- (flash canceled), 

RPT (repeating) flash)

• Group name (A, B, C)
• Flash output level compensation (in TTL and Auto Aperture flash (AA) modes)
• Manual flash output level (in M mode)
• Manual flash output level, the frequency, the number of repeating flashes per frame (in 

RPT mode)

• Channel number (1, 2, 3, or 4)

In Commander flash operation, the five flash modes (TTL, Auto Aperture flash 
(AA), M, --- (flash canceled), RPT (repeating)) are available.

• Flash modes can be separately set for each group (except RPT).
• Available flash modes vary depending on the camera and remote flash units in use.

*1 Auto Aperture flash mode is possible only when the SB-910, SB-900 or SB-800 is used as 

a remote flash unit in combination with CPU lenses. (A warning indicator appears when 
the SB-R200, SB-700 or SB-600 is used in the Auto Aperture flash mode.)

v Repeating flash operation

Repeating (RPT) flash operation is possible when the SU-800 is used with the 
SB-910, SB-900, SB-800, SB-700 or SB-600 (p. 93).

v Lenses

In this manual, NIKKOR lenses are divided into two 
types: CPU NIKKOR lenses and non-CPU NIKKOR 
lenses. CPU lenses have CPU contacts.

TTL

O

O

O

Auto Aperture flash (AA)

*1

X

O

X

M

O

O

O

--- (canceled)

O

O

O