Nikon R1C1 Manuel D’Utilisation
6
Repeating (RPT) flash operation
94
Setting a channel number on the SU-800
Press the [SEL](FUNC.) button on the SU-800 to display the channel number
(blinking). Press the [
(blinking). Press the [
W] or [X] button to change the channel number. Press the
[SEL](FUNC.) button once again and the channel number will stop blinking. The
last channel number to blink is the one that has been set automatically.
last channel number to blink is the one that has been set automatically.
• Select one of the four available channels. The same channel number is set for all Groups
A, B and C.
Setting a group and a channel number on the Speedlight
Set the same channel number as set on the SU-800.
• Refer to your Speedlight user’s manual for specific information on settings.
Setting the flash mode on each group
Press the [SEL](FUNC.) button to display the group (blinking). Press the [MODE]
button to set the group to fire or to cancel.
button to set the group to fire or to cancel.
Display when using the SB-800
Firing
Firing canceled
Firing canceled