Nikon MB-D11 Manuel D’Utilisation

7

Inserting Batteries
The MB-D11 can be used with one EN-EL15 rechargeable Li-ion battery, or with six AA batteries.

Before inserting batteries, be sure that the camera is off  and that the MB-D11 control lock is in the L position.

1  Turn the MB-D11 battery-chamber latch to   and remove the battery holder (Figure E).

2  Ready the batteries as described below.

EN-EL15: Matching the indentations on the battery to the projections on the MS-D11EN holder, insert the battery with the arrow (

▲) on the bat-

tery toward the battery holder power terminals (Figure F- 

q

). Press the battery lightly downward and slide it in the direction of the arrow until 

the power terminals click into place (Figure F- 

w

).

AA batteries: Place six AA batteries in the MS-D11 battery holder as shown in Figure G, making sure that the batteries are in the correct orienta-
tion.

3  Insert the battery holder in the MB-D11 and latch the battery-chamber cover (Figure H). Make sure the holder is fully inserted before turning the 

latch.

4  Turn the camera on and check the battery level in the control panel or viewfi nder. If the camera does not turn on, check that the battery is cor-

rectly inserted. 

When using the EP-5B power connector, insert it into the MS-D11EN holder with the arrow (

▲) on the connector toward the battery power terminals. Press 

the connector lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure I- 

q

). Open the holder power 

connector cover and pass the EP-5B power cable through the opening (Figure I- 

w

).