Nikon SB-5000 Guide D’Exploitation
H-18
H
Tips on Speedlight Care and Reference Information
En-01
Connecting to an external power source
To use an external power source,
remove the external power source
terminal cover and connect the power
cord to the terminal.
remove the external power source
terminal cover and connect the power
cord to the terminal.
• Do not use Power Cord SC-16 when
connecting the SB-5000 to the Nikon
DC Unit SD-7; use the SC-16A instead.
DC Unit SD-7; use the SC-16A instead.
v
Using High-performance Battery Pack SD-9 or SD-8A
Conducting continuous flash photography at 8 fps using the SD-9 with
8 batteries or SD-8A with 6 batteries can cause the front part of the flash
head to heat up. In flash photography, attaching the SD-9 or SD-8A to
the camera may cause some lineal noise to appear in the image. If this is
the case, set a lower ISO sensitivity or detach the SD-9 or SD-8A from the
camera and use separately.
8 batteries or SD-8A with 6 batteries can cause the front part of the flash
head to heat up. In flash photography, attaching the SD-9 or SD-8A to
the camera may cause some lineal noise to appear in the image. If this is
the case, set a lower ISO sensitivity or detach the SD-9 or SD-8A from the
camera and use separately.