Nikon COOLPIX S810c Guide D’Exploitation

E

Re
ference

B

• When positioning for the first time, when positioning was unable to be performed 

for about 2 hours, or after the battery was changed, it takes a few minutes to obtain 
the location data. After switching to the shooting application from another 
application such as the playback application, it takes a few seconds to obtain the 
location data.

• Positions of the GPS satellites change constantly. You may not be able to 

determine the position or it may take some time depending on your location and 
the time. To use the GPS, use the camera in an open-air area with few obstacles in 
the sky. Signal receiving will be smoother if the GPS antenna (

A1) is facing the 

sky.

• The following locations which block or reflect signals may result in failed or 

inaccurate positioning.

- Inside buildings or underground

- Between high-rise buildings

- Under overpasses

- Inside tunnels

- Near high-voltage electrical power lines

- Between clusters of trees

- Underwater

• Using a mobile phone of 1.5 GHz band near this camera may disrupt positioning.
• When carrying this camera around while positioning, do not place it in a metal bag. 

Positioning cannot be performed if the camera is covered with metal materials.

• When there is a significant difference in the signals from the GPS satellite, there 

could be a deviation of up to several hundred meters.

• Be aware of your surroundings when positioning.
• The shooting date and time that is displayed when playing back images is 

determined by the camera’s internal clock at the time of shooting. The camera 
does not display the time at which location data was obtained for an image.

• Location data will be recorded on the first frame of images shot using continuous 

shooting mode.

• The Geodetic system for this camera’s GPS uses the WGS 84 (World Geodetic 

System 1984).