Canon LV-7265 Manuel D'Instructions

•  Handle the remote control carefully.
•  If the remote control gets wet, wipe it dry immediately.
•  Avoid excessive heat and humidity.
•  Do not heat, take apart, or throw batteries into fire.
•  Ensure that you have the batteries' polarity (+/-) aligned correctly.
•  If you will not be using the remote control for a long time, remove the batteries.
•  Do not place the batteries upside down.
•  Do not use new and old batteries together, or use different types of batteries together.
•   Dispose of used batteries according to your local regulations.

Press  firmly  and  slide  the 
battery cover off.

Remove both old batteries and 
install new ones (AAA). Ensure 
that you have the batteries' po-
larity (+/–) aligned correctly.

Slip the cover back over the bat-
teries until it snaps into place. Do 
not  mix  different  types  of  batter-
ies or new and old batteries.

•  The  infrared  signal  operates  by  line-of-sight  up  to  a  distance  of  about  7  m  (22  feet)  and  within  a  60-degree 

angle of the remote sensor on the projector cabinet.

•  The projector will not respond if there are objects between the remote control and the sensor, or if strong light 

falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

30°

30°

30°
30°

30°
30°

30°
30°