Canon LV-7265 Manuel D'Instructions
8
2. Installation and Connections
Connecting Your PC or Macintosh Computer (LV-7260/LV-X7)
NOTE: The ANALOG IN connector supports Plug & Play (DDC2).
S-VIDEO
IN
VIDEO
IN
L
AUDIO IN
R
SERVICE PORT
ANALOG IN
ANALOG IN
AUDIO IN
PHONE
PHONE
Vga cable (supplied)
to mini d-sub 15-pin connector on the projector.
it is recommended that you use a commercially
available distribution amplifier if connecting a
signal cable longer than the supplied one.
it is recommended that you use a commercially
available distribution amplifier if connecting a
signal cable longer than the supplied one.
iBM PC or Compatibles (desktop type)
or Macintosh (desktop type)
or Macintosh (desktop type)
NOTE: For older Macintosh, use
a commercially available pin
adapter (not supplied) to connect
to your Mac's video port.
iBM Vga or Compatibles (notebook
type) or Macintosh (notebook type)
type) or Macintosh (notebook type)
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available
scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
• When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet.
audio cable
(not supplied)
(not supplied)