Canon LV-7292M Manuel D'Instructions

16

Adjustable Foot

Foot Lock Latch

Projection  angle  can  be  adjusted  up  to  10.0 

degrees with the adjustable foot. 

Lift the front of the projector and push the foot 

lock latch on the projector.

Release the foot lock latch to lock the adjustable 

foot and rotate the adjustable foot to adjust the 

position and tilt.

To retract the adjustable foot, lift the front of the 

projector and push and undo the foot lock latch.

Adjust the light axis vertically to the screen.

90˚

Light axis

Screen



    Keystone distortion of the projected image can be corrected by menu operation. (pp 26, 38, 40, 48, 50)



   

Retract the adjustable foot when transporting the projector.

 

When moving the projector horizontally, make suer to tilt the projector within ±20 degrees, otherwise it 

may result in lamp malfunction.

 

The projection image will become distorted if the adjustable foot is lifted too high or the project angle is   

too oblique to the screen. In these conditions, adjust the height of the support desk of the projector.

 

Do not expose the screen directly to the sunlight or lamp light, because this will make the screen too 

white to see the projection image clearly. When using the projector in a sufficient brightness room, slightly 

lower the brightness of the room. 



   

 If the projector is too oblique to the screen, part of the 

focus may be deviated.