Canon LV-7292M Manuel D'Instructions

20

This projector uses nominal input voltages of 100-

240 V AC and it automatically selects the correct 

input  voltage.  It  is  designed  to  work  with  single-

phase power systems having a grounded neutral 

conductor. To reduce the risk of electrical shock, 

do not plug into any other type of power system.

If  you  are  not  sure  of  the  type  of  power  being 

supplied, consult your authorized dealer or service 

center.

Connect  the  projector  with  all  peripheral 

equipment before turning the projector on.



Note:

     

Unplug the AC power cord when the projector is not in use.  When this projector  is connected to an outlet with

    the AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect the AC power cord 

(supplied) to the projector.

To the AC outlet.

To power cord 

connector on your 

projector.

To the AC outlet.

To the AC outlet.

Ground

AC power cord must meet requirement of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.





Ground

The AC outlet must be near this equipment 

and must be easily accessible.

  

Before using the AC Power Cord, attach the ferrite core (supplied) as shown below. (See below for 

mounting location.)

The Power Cord with ferrite core must be used for RF interference suppression.

0.39" (10 mm)

AC Power Cord

Ferrite Core

Keep closing until it makes  

 a clicking sound.