Canon LV-7292M Manuel D'Instructions

23

Power off? disappears after 4 seconds.

Press the POWER button on the top control 

or  on  the  remote  control  unit,  and 

off? appears on the screen.
Press the POWER button again to turn off 

the  projector. The  POWER  indicator  starts 

to  blink  red,  and  the  cooling  fans  keep 

running.  (You  can  select  the  level  of  fans’ 

quietness  and  speed.  See  “Fan”  on  page 

62.) At  this  time,  you  can  unplug  the AC 

power cord even if the fans are still running.

When the projector has cooled down 

enough, the POWER indicator stops 

blinking and you can turn on the projector. 



  •  When the Direct power on function is set to 

On, 

the projector will be turned on automatically by 

connecting the AC power cord to an AC outlet 

(p.56).

  •  The running speed of cooling fans is changed 

according to the temperature inside the projector.

  •  Do not put the projector in a case before the 

projector is cooled enough.

  •  If the WARNING indicator blinks or lights red, see 

“WARNING indicator” on page 65.

  •  While the POWER indicator is blinking, the lamp 

is being cooled down and the projector cannot be 

turned on. Wait until the POWER indicator stops 

blinking to turn on the projector again.

  •  The fan rotation will terminate directly if the AC 

power cord is unplugged immediately after the 

projector is turned off.

  •  The projector can be turned on after the POWER 

indicator turns red. The waiting time to restart 

will be shortened when the normal power-

off processing for fan cooling is completed, 

compared with the time the AC power cord is 

immediately unplugged after the power-off. 



     When using the Direct Power Off function, 

you can not restart the projector immediately 

after the power is disconnected. If the 

external power supply is suddenly cut off, 

the fans stop immediately. The lamp remains 

high temperature and needs to be cooled.

You can disconnect the power cord from the 

wall outlet or turn off the breaker even during 

projection  without  pressing  the  POWER 

button.

Direct Power Off Function