Canon LV-7292M Manuel D'Instructions

26

Rotate the Zoom Ring to zoom in and out.  

Rotate the Focus Ring to adjust the focus of the 

image.  

If a projected picture still has keystone distortion 

after pressing the AUTO SET button on the top 

control  or  the  remote  control  unit,  correct  the 

image manually as follows:

Press  the  KEYSTONE  button  on  the  remote 

control  unit. The  Keystone  dialog  box  appears. 

Use  the  Point  ▲▼  buttons  to  correct  keystone 

distortion.  The  keystone  adjustment  can  be 

stored (pp.38, 40, 48, 50).

Reduce the upper 

width with the Point ▲ 

button. 

Reduce the lower 

width with the Point 

▼ button.  

•The white arrows indicate that there is no 

correction.

•A blue arrow indicates the direction of 

correction.

•An arrow disappears at the maximum 

correction.

•If you press the KEYSTONE button on the 

remote control unit once more while the 

keystone dialog box is being displayed, the 

keystone adjustment will be canceled.

•The adjustable range is limited depending on 

the input signal. 

LV-RC06

Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input, 

Auto PC and Auto Keystone functions) in the setting menu by just pressing the AUTO SET button on 

the top control or the remote control unit. Refer to page 52 for the setting of the Auto setup function.



  •  Auto  Keystone  corrects  vertical  distortion  only;  it 

does not correct horizontal distortion.

  •  Auto Keystone cannot work when Ceiling feature is 

set to 

On in the Setting menu (pp.38, 40, 48, 50).

  •  Perfect  correction  of  the  image  distortion  cannot 

be  ensured  with  the Auto  setup  function.  If  the 

distortion cannot be corrected properly by pressing 

the AUTO SET button, adjust manually by pressing 

the KEYSTONE button on the remote control unit or 

selecting Keystone in the Aspect menu (pp.38, 40, 

48, 50).

  • 

Fine  sync,  Total  dots,  Horizontal  position  and 

Vertical  position  position  of  some  computers 

cannot  be  fully  adjusted  with  the  Auto  PC 

Adjustment  function.  When  the  image  is  not 

provided  properly  with  this  operation,  manual 

adjustments are required (pp.33-34).

Zoom Ring

Focus Ring 

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL