Canon LV-7292M Manuel D'Instructions
Computer Input
33
Computer Input
PC adjust Menu
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this
projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those
signal formats. The projector has 10 independent memory areas to store those parameters manually
adjusted. It allows you to recall the setting for a specific computer.
1
2
Use the Point ◄► buttons to adjust the value,
eliminating a flicker from the image displayed
(from 0 to 31).
Fine sync
Use the Point ◄► buttons to adjust the
number of total dots in one horizontal period to
match your PC image.
Total dots
Use the Point ◄► buttons to adjust the
horizontal picture position.
Horizontal position
Use the Point ◄► buttons to adjust the
vertical picture position.
Vertical position
Use the Point ◄► buttons to adjust the clamp
level. When the image has dark bars, try this
adjustment.
Clamp
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select
PC adjust and then
press the Point ► or the OK button.
Use the Point ▲▼ buttons to select the
desired item and then press the OK button
to display the adjustment dialog box. Use
the Point ◄► buttons to adjust the setting
value.
Use the Point ◄► buttons to adjust the vertical
area displayed by this projector.
Display area V
Use the Point ◄► buttons to adjust the
horizontal area displayed by this projector.
Display area H
Press the OK button to show
H-sync freq. and
V-sync freq. of the connected computer.
Current mode
Note:
•
Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.31).