Canon LV-7292M Manuel D'Instructions

Page de 84
8
Safety Instructions
Openings in the cabinet are provided for 
ventilation. To ensure reliable operation of the 
product and to protect it from overheating, these 
openings must not be blocked or covered. 
 
CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
–   Do not put any flammable object or spray can 
near the projector, hot air is exhausted from the 
ventilation holes.
–   Keep the exhaust vent at least 3’ (1 m) away 
from any objects.
–  Do not touch a peripheral part of the exhaust 
vent, especially screws and metallic parts. 
These areas will become hot while the 
projector is being used.
–  Do not put anything on the cabinet. Objects put 
on the cabinet will not only get damaged but 
also may cause fire hazard by heat.
–  Make sure that there is no object under the 
projector to prevent from covering the bottom 
openings.
Cooling fans are provided to cool down the 
projector. The fans’ running speed is changed 
according to the temperature inside the projector.
Moving the Projector
When moving the projector, retract the 
adjustable foot to prevent damage to the cabinet 
and use a suitable carrying case.
When this projector is not in use for an extended 
period, put it into a suitable case to protect the 
projector.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Do not pitch the projector more 
than 30 degrees from above and 
below.
Do not point the projector up to 
project an image.
Do not point the projector down to 
project an image. 
Do not put the projector on either 
side to project an image. 
Install the projector properly. Improper installation 
may reduce the lamp life and cause a fire hazard.
Do not roll the projector more 
than 20 degrees from side to 
side.
20°
20°
30°
30°
CAUTION IN CARRYING OR
TRANSPORTING THE PROjECTOR
–  Do not drop or bump the projector, otherwise 
damages or malfunctions may result.
–   When carrying the projector, use a suitable 
carrying case.
–  Do not transport the projector by courier or 
any other transport service in an unsuitable 
transport case. This may cause damage to the 
projector. For information about transporting 
the projector by courier or any other transport 
service, consult your dealer.
–  Do not put the projector in a case before the 
projector is cooled enough.
Air Intake Vent
Air Intake Vent (Filter)
Installing the Projector in Proper
Position