Canon LV-8320 Manuel D'Instructions

36

Press the MENU button to display the 

On-Screen Menu. Use the Point ▲▼ buttons 

to select 

Aspect and then press the Point ► 

button or the OK button.

Use the Point ▲▼ buttons to select the 

desired item and then press the OK button.

This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

Provide  the  image  in  its  original  size.  When  the 

original    image  size  is  larger  or  smaller  than  the 

screen  size  (1280  x  800),  the  projector  enters 

to  the  panning    mode    automatically.  Use  the 

Point  ▲▼◄►  buttons  to  pan  the  image.  When 

adjusted, the arrows will turn blue. When reached 

to the correction limits, the arrows will disappear.

Provide the full screen image. 



  • This projector cannot display any resolution 

higher than 1920 x 1200. If your computer’s 

screen resolution is higher than it, reset the 

resolution to the lower before connecting to 

the projector.

  • The  image  data  in  other  than  1280  x  800 

is  modified  to  fit  the  screen  size  in  initial 

mode.

  • 

True  and  Digital  zoom  +/–  are  disabled 

and  cannot  be  displayed  when 

480i, 

575i, 480p, 575p,  720p, 1035i  or  1080i  is 

selected in the PC System Menu (p. 30).

  •  When 

True is selected in the Screen menu, 

Digital zoom +/- can not be selected.

Provide the last stored aspect screen image. 

Provide the image at the 16:9 wide screen ratio.

Adjust the screen scale and position manually with 

this function. Press the Point ► button at 

Custom 

adj. and the Custom adjustment menu is displayed 

on the screen, you can use the Point ▲▼ buttons 

to choose the item you want to adjust.

 

Scale H/V ......  Adjust the Horizontal/Vertical 

screen scale.

 

H&V ...............  When set to On, the aspect 

ratio is fixed. The 

Scale V 

appears dimmed and becomes 

unavailable. Adjust 

Scale H, then 

the screen scale is automatically 

modified based on the aspect 

ratio. 

 

Position H/V ..  Adjust the Horizontal/Vertical 

screen position.

 

Common .......  Save the adjusted scale or 

position to all the inputs. Press 

the OK button at 

Common to 

display a confirmation box. To 

save the scale or position, press 

the OK button at 

Yes. When 

Custom is selected, the saved 

scale or position is used.

 

Reset .............  Reset the all adjusted values. 

Press the OK button at 

Reset to 

display a confirmation box. To 

reset, press the OK button at 

Yes.



  • When no signal is detected, 

Normal is set 

automatically .

  • The adjustable range for 

Scale H/V and 

Position H/V is limited depending on the input 

signal.

Scale the image proportionally to fit the entire 

screen.  Either  side  of  image  may  go  over  the 

screen.