Canon PowerShot G3 Mode D'Emploi
9
Quick Start
6
Turn the mode dial to
(p. 51).
7
Focus (p. 39).
Aim the camera and lightly press the shutter
button halfway. Two beeps will sound when the
autofocus is set.
button halfway. Two beeps will sound when the
autofocus is set.
8
Shoot (p. 39).
Press the shutter button all the way. You will hear
the sound of the shutter close when the shot is
complete.
the sound of the shutter close when the shot is
complete.
9
View the recorded image (p. 53).
The recorded image will display in the LCD
monitor for approximately 2 seconds. Keep your
finger on the shutter button or press the
button while the image is displayed to continue
to display the image after the shutter button is
released.
monitor for approximately 2 seconds. Keep your
finger on the shutter button or press the
button while the image is displayed to continue
to display the image after the shutter button is
released.
To Immediately Delete the Displayed
Image
Image
1. Press the button while the image is displayed.
2. Confirm that [Erase] is selected and press the
2. Confirm that [Erase] is selected and press the
button.
• Once you are done, press the
button to
turn off the power.