Manualsbrain.com
  1. Manuels
  2. Marques
  3. Canon
  4. LX-MU500
  5. Manuel D’Utilisation

Canon LX-MU500 Manuel D’Utilisation

Télécharger
Page de 85
54
When the projector is in normal conditions or in any abnormal conditions other than the ones 
mentioned below, the Error Status column will be "0:No Error".
(3 = Error)
iii. Press Exit to go back to the remote network operation page.
5.
After pressing the button ‘Contact IT Help’, the HELP DESK window will appear at the upper right 
corner. You will be able to deliver messages to RoomView™ software which is connected to the 
same local area network.
For more information, visit 
http://www.crestron.com
 & 
www.crestron.com/getroomview
.
Controlling the projector using PJLink™ application
This projector supports standard protocol PJLink™ for projector control and you can control and monitor 
projector's operations using the same application among projectors of different models and different 
manufacturers.
About PJLink™
•
To use PJLink™ function, the PJLink™ application software is required.
•
For the specifications of PJLink™, access to the Web site of Japan Business Machine and 
Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
•
This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the 
commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ 
standard specifications Version 1.4.
Utilizing the password function
To prevent unauthorized connection to the projector via PJLink™ application, the projector includes an 
option for setting up password security. To set the password:
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > LAN Settings menu. Press OK/
IMAGE. The LAN Settings page is displayed.
2.
Highlight PJLink Certification and select On by pressing  /
. The default password is "admin". 
3.
Press to 
highlight 
Change PJLink Password and press OK/IMAGE.
4.
Enter the current password. Press  ,   to select the digit and press  ,   to select from 0-9, A-Z, 
a-z or symbols. Press OK/IMAGE to confirm.
5.
Enter the new password and Press OK/IMAGE to confirm.
 If you forget the password, please use the password "projectorcontroller".
Error Status
Description
3: Lamp fail
The lamp fails to ignite or turns off during operation.
3: Over Temp
The projector temperature is too high or cannot be detected.
3: Fan Lock
The fan rotation speed cannot be set or detected.
3: Over Lamp Usage Time
The lamp is still in use after the lamp warning messages display.