Canon imageFORMULA CR-80 Manuel
22
Connecting the Power Cord
Connect the power cord.
Make sure to use only the power cord provided with the scanner.
Make sure to use only the power cord provided with the scanner.
WARNING
When connecting the power cord, follow these precautions. Failure to
do so may cause a fire or electrical shock.
do so may cause a fire or electrical shock.
•
Never grasp the power plug when your hands are wet.
•
Never plug the scanner into a multiplug power strip.
•
Never bundle or tie the power cord around itself or another object.
Connect the power plug securely into the power outlet.
Connect the power plug securely into the power outlet.
•
Use only the power cord and power plug provided with the scanner.
•
Before you connect the power cord, make sure to turn OFF the power switch.
•
Connect only to a power outlet of the rated voltage and power supply frequency
(either 120V, 60 Hz or 220-240V, 50/60 Hz, depending on your region).
(either 120V, 60 Hz or 220-240V, 50/60 Hz, depending on your region).
•
Do not plug the scanner into a power outlet shared with another
device. If you use an extension cord, make sure that the extension
cord is rated for the current requirements of the scanner.
device. If you use an extension cord, make sure that the extension
cord is rated for the current requirements of the scanner.
Follow the procedures below to turn the scanner power ON and OFF.
Turning ON the Power
A
To turn ON the scanner, slide the Power Switch to the right.
Turning ON and OFF the Power
(ON)