Canon PIXMA SELPHY CP1200 Mode D'Emploi
14
Printing Images (Select & Print)
Select images and specify the number of copies as follows. Here, printing
from an SD memory card is described as an example, but you can print
from other memory cards with the same steps.
1
Turn on SELPHY.
z
z
Hold the <q> button until the screen at
left is displayed.
z
z
To turn off SELPHY, hold the <q> button
again until the screen changes.
2
Raise the screen (LCD monitor).
z
z
The screen can be raised up to
approximately 45°. Do not attempt to
force the screen up more than this
amount, as doing so may damage the
printer or cause malfunction.
3
Insert the memory card into the
slot.
z
z
Insert the memory card facing as shown
until it clicks into place.
z
z
To remove the card, push it in until it
clicks, and then slowly release it.
z
z
The image display screen used in the
next step is displayed (
Approx. 45°
Label side
4
Choose an image.
z
z
Press the <l><r> buttons to select an
image to print.
z
z
To jump forward or back by five images,
hold down the <l><r> buttons.
5
Choose the number of copies.
z
z
Press the <u><d> buttons to specify
the number of prints.
z
z
To increase or decrease the quantity by
five copies, hold down the <u><d>
buttons.
z
z
To print other images at the same time,
repeat steps 4 – 5.
6
Print.
z
z
Press the <p> button to start printing.
z
z
While printing, paper passes in and out
of the back of SELPHY several times.
Do not touch the paper until printing is
finished and the print is ejected onto the
paper cassette.
z
z
Do not allow 19 or more prints to
collect in the ejection area on the paper
cassette.
z
z
To cancel printing in progress, always
press the <v> button.
Copies of current image
Total prints