Canon LX-MU700 Manuel
40
Label
Description
Lamp Warning Display Press ◄ or ► to enable or disable the warning message.
Specify whether to show a lamp replacement message after the lamp has
been used for a specified period.
■
Setting display to
Off will disable both the message to prepare a
replacement lamp and the warning to replace the lamp. To review the
replacement timing, check the lamp counter.
■
Lamps that are still used after the timing for lamp replacement are
more likely to rupture. Replace the lamp with a new one as soon as
possible.
Lamp 1 Status
Shows the current status of Lamp 1.
Lamp 2 Status
Shows the current status of Lamp 2.
ALIGNMENT Menu
Label
Description
Projection Mode
Press ◄ or ► to select a projection mode. The options are
Front Table,
Rear Table, Front Ceiling, Rear Ceiling, Up + Front and Down + Front.
Lens Control
Press
ENTER to enter the Lens Control menu. See “
Lens Memory
Press
ENTER to enter the Lens Memory menu. See “
Center Lens
Press
ENTER to set the lens to the default center position.
Note:
Calibrate the lens whenever a lens is mounted on the projector.
Keystone
Press ◄ or ► to adjust vertical distortion brought by the projection angle.
Digital Alignment*
Press
ENTER to enter the Digital Alignment menu. See “
.