Canon VB-M50B Manuel D’Utilisation
32
Video
(1)
[Video Size Set]
Set the set of video sizes to use with the camera.
Set the set of video sizes to use with the camera.
(2)
[H.264(2)]
Select [Disable] to transmit only one stream of H.264 video.
Select [Disable] to transmit only one stream of H.264 video.
Select [Enable] to transmit two streams of H.264 video.
(3)
[H.264(1)]/[H.264(2)]
Configure on each tab the settings for the H.264(1) and H.264(2) video to be transmitted from the camera to the
Configure on each tab the settings for the H.264(1) and H.264(2) video to be transmitted from the camera to the
Viewer.
(4)
[Video Size]
Select the size for video transmitted from the camera.
(5)
[Bit Rate Control]
Set the bit rate for video.
When [Use bit rate control] is selected, also set [Target Bit Rate (kbps)].
If [Do not use bit rate control] is selected, set [Video Quality].
(6)
[Target Bit Rate]
If the [Bit Rate Control] is set to [Use bit rate control], select the target bit rate.
If the [Bit Rate Control] is set to [Use bit rate control], select the target bit rate.
(7)
[Video Quality]
If the [Bit Rate Control] is set to [Do not use bit rate control], select the video quality.
If the [Bit Rate Control] is set to [Do not use bit rate control], select the video quality.
(8)
[Frame Rate]
Select the video frame rate for video.
Select the video frame rate for video.
(9)
[I Frame Interval]
Select the I frame interval (sec) for H.264 video.
Select the I frame interval (sec) for H.264 video.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)