Canon VB-R13 Manuel

T

roubleshooting

9

151

Adding a 
recording 
schedule

Streaming for recording is 
applied only when the following 
conditions are satisfied:
The video stream format is JPEG
The frame rate settings do not 
exceed ten fps
There is no existing recording-
mode stream in the camera.

Tried to enable a recording-mode stream.

Recording 
schedule

This schedule item overlaps a 
previously scheduled item. 
Please check your settings and 
try again.

Recording schedules overlap.

Recording schedule items must 
be set at least 15 minutes long. 
Please check your settings and 
try again.

Tried to set a schedule with a period shorter than 15 minutes.

Recording schedule items 
cannot be created for the 
following cameras because of a 
clash with existing schedules: 
<camera name>

Tried to drag a recording schedule window to add multiple recording 
schedules, but one camera has a conflicting schedule.

Failed to create multiple 
recording schedule items. All 
selected cameras have 
recording schedule items that 
clash with a schedule time 
range.

Tried to add a recording schedule to multiple cameras using the [Edit 
Schedule Item] dialog box, but the schedule time range clashes with 
schedules that are already set on the cameras.

At least one day must be 
selected. Please check your 
settings and try again.

Tried to register a schedule without specifying a day.

At least one recording mode 
must be selected. Please check 
your settings and try again.

Tried to register a schedule without selecting the check box for a 
recording mode.

You cannot use digital zoom with 
<current camera position>.

Tried to specify the digital zoom range and close the [Edit Schedule 
Item] dialog box with [Current Camera Position] selected.

Special day 
schedules

This schedule type has days set 
up for it to be used on. These 
need to be removed before 
deleting the schedule type.

Tried to delete the special day schedule that has scheduled days.

This day has already been set as 
special day schedule <schedule 
name>. Do you want to delete 
the day from the special day 
schedule <schedule name> and 
use it in this schedule?

Tried to use dates that are already used for another special day 
schedule.

Special day schedules cannot 
be set the end time which is 
earlier than the start time.

Tried to register a schedule that goes past 24:00.

A schedule with this name 
already exists.

Tried to add a special day schedule with a name that already exists.

Adding and 
editing a 
camera

Could not connect to camera. 
Please verify that the host name, 
port number, user name, and 
password are correct.

Could not connect to camera.

Are you sure you want to remove 
the camera <camera name>? If 
the camera is removed, you will 
not be able to play back 
recorded video.

Tried to delete a camera.

Message

Cause