Canon Wireless File Transmitter WFT-E6A Manuel
28
These instructions are continued from Chapter 1.
1
Turn the <5> dial to select [Address setting],
and then press <0>.
and then press <0>.
2
If you have set the DNS server setting to
[Disable], the screen on the left is displayed.
[Disable], the screen on the left is displayed.
Press <0> to select the input position, and then
turn the <5> dial to enter the IP address of the
FTP server.
turn the <5> dial to enter the IP address of the
FTP server.
If you have set the DNS server IP address setting
to [Auto assign] or [Manual setting], the screen
on the left is displayed.
to [Auto assign] or [Manual setting], the screen
on the left is displayed.
For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.25).
“Virtual Keyboard Operation” (p.25).
Enter the FTP server’s server name or IP address.
3
In [Port number setting], enter 00021, in most
cases.
cases.
Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.
<0> to go to the next screen.
4
Complete the [Passive mode] settings.
If an Error 41 (“Cannot connect to FTP server”) is
displayed in step 8, setting [Passive mode] to
[Enable] may resolve it.
displayed in step 8, setting [Passive mode] to
[Enable] may resolve it.
5
Complete the [Proxy server] settings.
Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.
<0> to go to the next screen.
Configuring FTP Communication Settings