Canon LV-7490 Brochure
LV-7490 Expand Serial Command Functional Specifications
38
8.10.3 CF_INPUTSEARCH Command
Command “CF_INPUTSEARCH_%1”[CR]
%1
“OFF” ------------------------- Set Auto input operation to OFF
“ON1” ------------------------- Set Auto input operation to On1
“ON2” ------------------------- Set Auto input operation to On2
“ON1” ------------------------- Set Auto input operation to On1
“ON2” ------------------------- Set Auto input operation to On2
Details
Set Auto input operation mode.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Auto input OFF command while Auto PC and Keystone
are OFF, it returns error code “101”..
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Auto input OFF command while Auto PC and Keystone
are OFF, it returns error code “101”..
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.4 CF_AUTOSETUPPCADJ Command
Command “CF_AUTOSETUPPCADJ_%1”[CR]
%1
“ON” ------------------- Set Auto PC function to ON
“OFF” ------------------ Set Auto PC function to OFF
“OFF” ------------------ Set Auto PC function to OFF
Details
Set/Cancel Auto PC function
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Auto PC OFF command while Keystone and Auto input
are OFF, it returns error code “101”.
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Auto PC OFF command while Keystone and Auto input
are OFF, it returns error code “101”.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.5 CF_AUTOSETUPKEYSTONE Command
Command “CF_AUTOSETUPKEYSTONE_%1”[CR]
%1
“AUTO” ------------------- Set Auto Keystone function to Auto
“MANUAL” --------------- Set Auto Keystone function to Manual
“OFF” --------------------- Set Auto Keystone function to OFF
“MANUAL” --------------- Set Auto Keystone function to Manual
“OFF” --------------------- Set Auto Keystone function to OFF
Details
Set Keystone function of Auto setup
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Keystone OFF command while Auto PC and Auto input
are OFF, it returns error code “101”..
This command is available in normal Power ON status.
Note) It is unable to set Keystone, Auto PC and Auto input to OFF at once.
e.g. If projector receives Keystone OFF command while Auto PC and Auto input
are OFF, it returns error code “101”..
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.6 CF_AUTOSETUP Command
Command “CF_AUTOSETUP_%1”[CR]
%1
“START” ------------------- Execute Auto Setup
Details
Execute Auto Setup
Note) CF commands does not execute while Auto setup is in process. If the
command is sent during this, projector returns error code “302”
Note) CF commands does not execute while Auto setup is in process. If the
command is sent during this, projector returns error code “302”
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]