Canon LV-7490 Brochure
LV-7490 Expand Serial Command Functional Specifications
41
8.10.11 CF_P-MANE Command
Command “CF_P－MANE_%1”[CR]
%1
“OFF” --------------------------------- Set Power management mode to OFF
“READY” ----------------------------- Set Power management mode to Standby
“SHUTDOWN” --------------------- Set Power management mode to Exit mode
“UP” ----------------------- The same operation as pressing Up key or Left key
“DN” ----------------------- The same operation as pressing Down key or Right key
“READY” ----------------------------- Set Power management mode to Standby
“SHUTDOWN” --------------------- Set Power management mode to Exit mode
“UP” ----------------------- The same operation as pressing Up key or Left key
“DN” ----------------------- The same operation as pressing Down key or Right key
Details
Set/Cancel Power management mode
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.12 CF_P-MANETIME Command
Command “CF_P-MANETIME_%1”[CR]
％１
“01” ~ ”30” ----------------------- Directly select setting time by the minute
“UP” ------------------------------- Plus one minute (01 → 02 → ･･･ → 30 → 01)
“DN” ------------------------------- Minus one minute(30 → 29 → ･･･ → 01 → 30)
“UP” ------------------------------- Plus one minute (01 → 02 → ･･･ → 30 → 01)
“DN” ------------------------------- Minus one minute(30 → 29 → ･･･ → 01 → 30)
Details
Set Power management mode time
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.13 CF_ON-STA Command
Command “CF_ON－STA_%1”[CR]
%1
“ON” -------------------------- Set Direct power on active
“OFF” ------------------------- Set Direct power on inactive
“UP” ----------------------- The same operation as pressing Up key or Left key
“DN” ----------------------- The same operation as pressing Down key or Right key
“OFF” ------------------------- Set Direct power on inactive
“UP” ----------------------- The same operation as pressing Up key or Left key
“DN” ----------------------- The same operation as pressing Down key or Right key
Details
Set/Cancel Direct power on
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.14 CF_STANDBYMODE Command
Command “CF_STANDBYMODE_%1”[CR]
%1
“ECO” ---------------------- Less standby electricity
“NORMAL” ------- -------- Normal standby electricity
“NORMAL” ------- -------- Normal standby electricity
Details
Switch Standby Mode setting.
This command is available in normal Power ON status.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]