Canon LV-7490 Brochure
LV-7490 Expand Serial Command Functional Specifications
45
8.10.25 CF_DELAYCTRL Command
Command “CF_DELAYCTRL_%1”[CR]
%1
“ON” --------------------------- Set Video delay control On
“OFF” -------------------------- Set Video delay control Off
“OFF” -------------------------- Set Video delay control Off
Details
Set Video delay control.
The status set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF. This command is available in normal Power ON status.
The status set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF. This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.26 CF_FILTIMER Command
Command “CF_FILTIMER_%1”[CR]
%1
“1000” -------------------- Set 1000 hours
“2000” -------------------- Set 2000 hours
“3000” -------------------- Set 3000 hours
“4000” -------------------- Set 4000 hours
“5000” -------------------- Set 5000 hours
“6000” -------------------- Set 6000 hours
“OFF” ------------------- No warning display
“UP” --------------- The same operation as pressing Up key or Left key
“DN” --------------- The same operation as pressing Down key or Right key
“2000” -------------------- Set 2000 hours
“3000” -------------------- Set 3000 hours
“4000” -------------------- Set 4000 hours
“5000” -------------------- Set 5000 hours
“6000” -------------------- Set 6000 hours
“OFF” ------------------- No warning display
“UP” --------------- The same operation as pressing Up key or Left key
“DN” --------------- The same operation as pressing Down key or Right key
Details
Set timer of Filter replacement /clean-up warning display.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.27 CF_FILH Command
Command “CF_FILH_%1”[CR]
%1
“RST” ---------------Reset Filter used time
Details
Reset filter used time
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.28 CF_TTLPWRSAVE Command
Command “CF_TTLPWRSAVE
_%1”[CR]
%1
“RST” ---------------Reset Total power savings
Details
Reset the value of Total power savings
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.29 CF_FDEFAULT Command
Command “CF_FDEFAULT_%1”[CR]
%1 “RST”
Details
Set the value to Factory Default
This command is available in normal Power ON status.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]