Canon LV-7490 Brochure
LV-7490 Expand Serial Command Functional Specifications
51
9.4.10 CR_COLTEMP Command
Command "CR_COLTEMP”[CR]
Details
Get Color Temp. setting value
Response
Acceptable “000_%a”[CR]
%a
“000” ------------------------------ Xlow
“001” ------------------------------ Low
“002” ------------------------------ Mid
“003” ------------------------------ High
“BLACK” -------------------- Blackboard(Green) mode selected
“COLOR” ------------------- Colorboard selected
“BLANK” -------------------- White Balance has been changed
“001” ------------------------------ Low
“002” ------------------------------ Mid
“003” ------------------------------ High
“BLACK” -------------------- Blackboard(Green) mode selected
“COLOR” ------------------- Colorboard selected
“BLANK” -------------------- White Balance has been changed
Unacceptable “Error
Code”[CR]
9.4.11 CR_NZRED Command
Command “CR_NZRED”[CR]
Details
Get setting status of Noise Reduction
Response
Acceptable “000_%1”[CR]
%1
“L1” -------- Noise Reduction for moving image
“L2” -------- Noise Reduction for still image
“OFF” ----- Noise Reduction is OFF
“L2” -------- Noise Reduction for still image
“OFF” ----- Noise Reduction is OFF
Unacceptable “Error
Code”[CR]
9.4.12 CR_PROGV Command
Command “CR_PROGV”[CR]
Details
Get setting status of Progressive scan
Response
Acceptable “000_%a”[CR]
%a
“L1” ----------------- Progressive Mode L1 is selected
“L2” ----------------- Progressive Mode L2 is selected
“FILM” -------------- Progressive Model FILM is selected
“OFF” --------------- Progressive scan is disabled
“L2” ----------------- Progressive Mode L2 is selected
“FILM” -------------- Progressive Model FILM is selected
“OFF” --------------- Progressive scan is disabled
Unacceptable “Error
Code”[CR]
9.4.13 CR_IMAGE Command
Command “CR_IMAGE”[CR]
Details
Get image setting status
Required data “CUSTOM1” to “CUSTOM4” is the same as “Image1” to “Image4”
displayed when selecting IMAGE on OSD menu
Required data “CUSTOM1” to “CUSTOM4” is the same as “Image1” to “Image4”
displayed when selecting IMAGE on OSD menu
Response
Acceptable “000_%a”[CR]
%a
“DYNAMIC” --------------------------------------- Presentation
“STAND” ------------------------------------------- Standard
“REAL” --------------------------------------------- High contrast
“CINEMA” ----------------------------------------- Cinema
“BLACKBOARD” -------------------------------- Blackboard
“COLORBOARD” -------------------------------- Colorboard
“CUSTOM1”~”CUSTOM4” -------------------- User1~4
“STAND” ------------------------------------------- Standard
“REAL” --------------------------------------------- High contrast
“CINEMA” ----------------------------------------- Cinema
“BLACKBOARD” -------------------------------- Blackboard
“COLORBOARD” -------------------------------- Colorboard
“CUSTOM1”~”CUSTOM4” -------------------- User1~4
Unacceptable
“Error Code”[CR] ---- When the command is invalid due to
condition such as Input source