Canon DP-V3010 Brochure
SPECIFICATIONS
DP-V3010 4K REFERENCE DISPLAY
|
PRODUCT NAME: DP-V3010
|
ITEM CODE: 6902B002
|
UPC CODE: 013803161519
DISPLAY UNIT
PANEL
PANEL TYPE
IPS LCD Panel
SCREEN SIZE
30 inch (76.1 cm)
ASPECT RATIO
16:10
RESOLUTION
4096 x 2560 (10.5 megapixels)
ACTIVE DISPLAY AREA
Approximately 25.4 x 15.9 in. (645.1 x 403.2 mm)
PIXEL PITCH
157.5 μm
PANEL DRIVER
1024 gradations (10-bit for each RGB color)
IMAGE
QUALITY
BRIGHTNESS (STANDARD)
48 cd/m
2
(DCI), 100 cd/m
2
VIEW ANGLE
(UP, DOWN, LEFT, RIGHT)
(UP, DOWN, LEFT, RIGHT)
89º (Contrast ratio 10:1 or higher)
SURFACE TREATMENT
Low-Reflection Glare
GENERAL
BACKLIGHT TYPE
RGB LED, direct down type
POWER
RATED
VOLTAGE
VOLTAGE
100 – 240V AC
RATED
FREQUENCY
FREQUENCY
50/60 Hz
POWER CONSUMPTION
At maximum load (including change in brightness through aging):
Approx. 370 W
At factory shipment: Approximately 130 W
Approx. 370 W
At factory shipment: Approximately 130 W
ENVIRONMENTAL
CONDITIONS
CONDITIONS
OPERATING
Temperature and humidity: 41–95°F (5–35°C) / 20–80% RH (no condensation)
[Recommended: 59–86°F (15–30°C)] / Pressure: 700–1060 hPa
[Recommended: 59–86°F (15–30°C)] / Pressure: 700–1060 hPa
STORAGE/
TRANSPORTING
TRANSPORTING
Temperature and humidity: -4–104°F (-20–40˚C) / 10–85% RH
(no condensation)
105–140°F (41–60˚C) / 10–40% RH (no condensation) /
Pressure: 700–1060 hPa
(no condensation)
105–140°F (41–60˚C) / 10–40% RH (no condensation) /
Pressure: 700–1060 hPa
DIMENSIONS (W X H X D)
Approx. 27.9 x 18.7 x 7.4 in. (708 x 474 x 189 mm)
WEIGHT
Approx. 52.8 lb. (24 kg)
MOUNTING HOLE PITCH
VESA Standard 7.9 x 7.9 in. (200 x 200 mm)
INTERFACE
INPUT
3G/HD-SDI
8 (2 systems) BNC (75Ω) receptacle terminal
DISPLAYPORT
4 (1 system ver.1.1a compliant) DisplayPort interfaces
OUTPUT
3G/HD-SDI
8 (2 pass-thru systems)
CONTROL
USB
VOLTAGE
VOLTAGE
1 (USB A Receptacle Terminal)
Universal Serial Bus Specification Revision 2.0 Compliant LS (Low Speed)/FS
(Full Speed)/HS (High Speed) Mode Compatible
Universal Serial Bus Specification Revision 2.0 Compliant LS (Low Speed)/FS
(Full Speed)/HS (High Speed) Mode Compatible
LAN
1 RJ-45 terminal
SUPPLIED
ACCESSORIES
Display Controller, AC Power Cord, Compact Power Adapter, AC Cable, Tip Prevention Fitting, LAN Cable, Rack
Mount Bracket, Rack Mount Bracket Screw, Hex Key, Instruction Manual and Instruction Manual Disc
DISPLAY CONTROLLER
GENERAL
POWER
RATED
VOLTAGE
VOLTAGE
100 – 240V AC
RATED
FREQUENCY
FREQUENCY
50/60 Hz
POWER CONSUMPTION
At maximum load: Approximately 2 W
At factory shipment: Approximately 2 W
At factory shipment: Approximately 2 W
ENVIRONMENTAL
CONDITIONS
CONDITIONS
OPERATING
Temperature and humidity: 41–95°F (5–35°C) / 20–80% RH
(no condensation)
(no condensation)
STORAGE/
TRANSPORTING
TRANSPORTING
Temperature and humidity: -4–104°F (-20–40˚C) / 10–85% RH
(no condensation)
105–140°F (41–60˚C) / 10–40% RH (no condensation)
(no condensation)
105–140°F (41–60˚C) / 10–40% RH (no condensation)
WEIGHT
Approximately 16.2 oz. (460g)
MOUNTING HOLE PITCH
EIA2U standard 3.0 x 18.3 in. (76.2 x 465.9 mm)
CONTROL
LAN
1 RJ-45 Terminal
*These functions will be supported by the firmware update being released in November 2015
©2015 Canon U.S.A., Inc. All rights reserved. Not responsible for typographical errors.
Specifications subject to change without notice. Products not shown to scale. Certain images
and effects are simulated. Canon is a registered trademark of Canon Inc. in the United
States and may also be a trademark or registered trademark in other countries. All other
products and brand names may be registered trademarks, trademarks or service marks of
their respective owners in the United States and/or other countries.
For more info:
1-855-4K-CANON (1-855-452-2666)
pro.usa.canon.com
display@cusa.canon.com
@CanonUSApro
0181W695 4/15
SUPPORT FOR ACESPROXY (ACES 1.0)*
The new firmware will enable the DP-V3010 4K Reference
Display to support the latest ACESproxy transfer standard
for the ACES (Academy Color Encoding System) color
management standard. When used in combination with any
camera with ACESproxy output, the DP-V3010 will deliver
consistent color reproduction both on-set and during the
editing process, contributing to improved workflow efficiency.
Display to support the latest ACESproxy transfer standard
for the ACES (Academy Color Encoding System) color
management standard. When used in combination with any
camera with ACESproxy output, the DP-V3010 will deliver
consistent color reproduction both on-set and during the
editing process, contributing to improved workflow efficiency.
The new firmware will allow the DP-V3010 to support
the ability to display HDR footage captured by Canon’s
proprietary Canon Log and Canon Log 2 gamma settings,
as well as HDR EOTF (Electro-Optical Transfer Function)
recommended by the SMPTE ST 2084 standard. The HDR
display function allows users to view and confirm the subtle
details of underexposed and overexposed areas of displayed
images and to compare SDR (Standard Dynamic Range)
images with HDR images. This allows users to see the final
image quality at the shooting location, providing greater
efficiency in the production workflow.
the ability to display HDR footage captured by Canon’s
proprietary Canon Log and Canon Log 2 gamma settings,
as well as HDR EOTF (Electro-Optical Transfer Function)
recommended by the SMPTE ST 2084 standard. The HDR
display function allows users to view and confirm the subtle
details of underexposed and overexposed areas of displayed
images and to compare SDR (Standard Dynamic Range)
images with HDR images. This allows users to see the final
image quality at the shooting location, providing greater
efficiency in the production workflow.
HIGH DYNAMIC RANGE (HDR)*
The DP-V3010 supports
multiple broadcast
standards such as ITU-R
BT.709, EBU and SMPTE-C
as well as DCI- P3 (SMPTE
PR 431-2) digital cinema
standard. It also supports
Cinema Gamut and DCI-P3+
color gamut, supported by
the Cinema EOS System.
The DP-V3010 meets the
next-generation standards of ITU-R BT.2020 and ACESproxy.
Although the ITU-R BT. 2020 color gamut is broader than the
native color gamut of the DP- V3010, DP-V3010 optimizes the
display of data outside of the native color gamut.
multiple broadcast
standards such as ITU-R
BT.709, EBU and SMPTE-C
as well as DCI- P3 (SMPTE
PR 431-2) digital cinema
standard. It also supports
Cinema Gamut and DCI-P3+
color gamut, supported by
the Cinema EOS System.
The DP-V3010 meets the
next-generation standards of ITU-R BT.2020 and ACESproxy.
Although the ITU-R BT. 2020 color gamut is broader than the
native color gamut of the DP- V3010, DP-V3010 optimizes the
display of data outside of the native color gamut.
DCI-P3+
Cinema Gamut
ACES
DCI-P3
ITU-R BT.2020
DP-V3010 Native
ITU-R BT.709
ITU-R BT.709
- 0.2
0
0.2
0.4
0.6
0.8
1
1.2
0.2
0.4
0.6
0.8
x
y
FAITHFUL COLOR REPRODUCTION