Canon DP-V3010 Manuel

51

OSD Menu

Channel Settings

This menu is used for input related settings. Select the "Select Channel" item and choose a channel number from CH1
to CH30. Finally define the parameter of each of the "Channel Settings".

Item

Setting Options (underline indicates factory default)

Select Channel

Displays the channel number. In addition, you can assign each content of "Channel Settings" to each
channel (

CH1 to CH30

Note

•  It may take 10 seconds when switching channels.

Input Configuration

Select the input. Factory default depends on the channel (

Select Input Signal

Sets the signal display method (

Automatic: "4K Input" and "Single Input" are automatically determined.
4K Input: Displays the signal transmitted over four inputs.

Single Input: Displays the signal of a single input onto the center of the screen. Select from A to D.

Format

Sets the color format and gradation.
Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit, 
4:4:4 YCbCr 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 12-bit

Note

•  HD-SDI is fixed to "4:2:2 YCbCr 10-bit".
•  DisplayPort is fixed to "Automatic".
•  Operations when "Automatic" is selected are described below:

-

When "4K Input" is selected, they are rendered in a Payload that is selected in the order of
priority A → B → C → D in the display area.

-

When receiving 3G-SDI or Dual Link HD-SDI input, all signals without a payload format will
be rendered in "4:4:4 RGB 10-bit".

Internal Sync

Synchronizes four inputs for "4K Input".
On: Force synchronization.
Off: Do not force synchronization.

Channel Name

Sets the name of the selected channel. You can input up to 16 alphanumeric characters.

Picture Mode

Sets the "Picture Mode".