Canon DP-V3010 Manuel

64

OSD Menu

Item

Setting Options (underline indicates factory default)

Color

Sets the signals to be displayed and the color of signals exceeding the standard level.
Y, Cb, Cr, R, G, B: Selects the signal.
Selects the color of the selected signal.

Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
Standard Level High, Standard Level Low: Selects the standard level.

Default value of each standard level is shown below.
Standard Level High (Magenta), Standard Level Low (Cyan)

Vector Scope

Vector Scope is displayed for SDI signals. Vector scope displays the intensity of color signals and
hue with the horizontal axis showing the color difference signal Cb and the vertical line showing Cr.

Red

Green

Yellow

Blue

Cyan

Magenta

(Cb, Cr) = (255, 255)

(Cb, Cr) = (0, 0)

Cr

Cb

Note

•  "Vector Scope" is not displayed in the following cases:

-

When "Frame Hold" or "False Color" is "On"

-

When "Peaking 1" or "Peaking 2" is selected

-

During the execution of "Playback File" under "Screen Capture"

-

When a "Test Pattern" is displayed

-

When "H Delay"/"V Delay" is "On"

•  When "Vector Scope" is "On", "Wave Form Monitor" is "Off".

Enable

Switches the vector scope On, Off.
On, Off

Target

Sets the target.
75%, 100%

Position

Selects the display position.
Bottom Left, Bottom Right