ASUS Hummingbird Manuel D’Utilisation

ASUS Hummingbird

4-13

BIOS SETUP UTILITY

Main

Storage Configuration

Configure SATA as

[IDE]

SATA Run Mode Configuration

[Enhanced]

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

4.3.4

Storage Configuration

The items in this menu allow you to set or change the configurations for the SATA

devices installed in the system. Select an item then press <Enter> if you wish to

configure the item.

Options

IDE

AHCI

Disabled

Configure SATA as [IDE]

Sets the configuration for the Serial ATA connectors supported by the Intel

NM10

chipset. Configuration options: [IDE] [AHCI] [Disabled]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, keep the default setting [IDE].

• If you want the Serial ATA hard disk drives to use the Advanced Host

Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows

the onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing the drive

to internally optimize the order of commands.

SATA Run Mode Configuration [Enhanced]

This item appears only when you set the previous item to [IDE].

Configuration options: [Compatible] [Enhanced]