ASUS Hummingbird Manuel D’Utilisation
4-24
Chapter 4: BIOS setup
4.6.5
APM Configuration
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
APM Configuration
Restore on AC Power Loss
[Power Off]
Resume On RTC Alarm
[Disabled]
Power On By PCIE Devices
[Disabled]
Power On By PS/2 Keyboard
[Disabled]
Power On By PS/2 Mouse
[Disabled]
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Power
Restore on AC Power Loss [Power off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only when the Resume On RTC Alarm item is set
to [Enabled].
RTC Alarm Date (Days) [15]
To set the alarm date, highlight this item and press the <+> or <-> key to make the
selection.
System Time [12:30:30]
Use the <ENTER>, <TAB> or <SHIFT-TAB> key to select a field. Use the <+> or
<-> key to configure alarm time.
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to enable or disable the Power On by a PS/2 keyboard. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power Off
Power On
Last State
Options