ASUS ESC4000-FDR G2S Manuel D’Utilisation

6-24

Chapter 6: RAID configuration

The Intel

®

 Rapid Storage Technology enterprise SCU / SATA Option ROM utility allows you 

to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk 

drives that are connected to the Serial ATA connectors supported by the Southbridge.

You can create RAID mode by use of onboard AHCI SATA ports. Also, when installed 

optional ASRK module, you can use onboard scu SAS ports to create RAID mode. 
To use onboard SATA  ports:

1.   Install all the Serial ATA hard disk drives.

2.   Turning on the system. During POST, press,Del. to enter BIOS. Go to Advanced 

 > PCH SATA Configuration > SATA Mode, then press <Enter>.

3.   Set SATA Mode to RAID Mode and save, then reboot system.

4.   During POST, press <Ctrl+I> to display the utility main menu.

1. 

Install all the SATA hard disk drives.

2. 

Turning on the system. During POST, press <Del> to enter BIOS. Go to Advanced 

 > PCH SCU SAS Configuration, then press <Enter>.

3. 

Confirm all the SAS hard disk drives you installed are correctly displayed, then reboot 

system.

4. 

During POST, press <Ctrl+I> to display the utility main menu.