ASUS ESC4000-FDR G2S Manuel D’Utilisation
Chapter 2: Hardware setup
2-22
2.8.3
Installing ASUS PIKE SAS RAID Card (optional)
Follow the steps below to install the optional ASUS PIKE SAS RAID card to the ASUS PIKE
riser card.
4.
Secure the PIKE riser card with two
screws.
You can secure PIKE 2008, 2108, or
2308 cards with only one screw.
3.
Locate the two screw holes on the PIKE riser card.
2.
Locate the two screws on the riser card
bracket, then remove the screws from
the bracket.
1.
Remove the two screws on the riser
card.
2. Detach the riser card from the PCI
Express x16 slot on the motherboard.