ASUS ESC4000-FDR G2S Manuel D’Utilisation
第五章：BIOS 程式設定
5-14
5.4.3 晶片組設定（Chipset Configuration）
QPI 設定
Isoc [Enabled]
設定值有：[Disabled] [Enabled]
QPI Link Speed Mode [Fast]
本項目提供您選擇 QPI link speed 為 fast mode（快速模式）或 slow mode
（慢速模式）。設定值有：[Slow] [Fast]
QPI Link Frequency Select [Auto]
本項目提供您選擇 QPI 連線頻率。設定值有：[Auto] [6.4 GT/s] [7.2 GT/s
(Fast Mode Only)] [8.0 GT/s (Fast Mode Only)]
QPI Link0s [Disabled]
設定值有：[Disabled] [Enabled]
QPI Link0p [Disabled]
設定值有：[Disabled] [Enabled]
QPI Link1 [Enabled]
設定值有：[Disabled] [Enabled]
Recommended short duration power1 1.2 * Long Duraton
Short duation power limit 0
提供您以瓦數為單位來設定 short duration power limit。使用 <+> 或 <-> 鍵
來調整想要的數值。
QPI Configuration
Memory Configuration
CPU II0 Bridge Configuration
PCH Configuration
Intel(R) VT for Directed I/O Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
QPI Configuration Page
Current QPI Link Speed
Fast
Current QPI Link Freq
8.0 GT/s
Isoc
[Enabled]
QPI Link Speed Mode
[Fast]
QPI Link Frequency Select [Auto]
QPI Link0s
[Disabled]
QPI Link0p
[Disabled]
QPI Link1
[Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Enable/Disable Isoc