ASUS E2KM1I-DELUXE Manuel D’Utilisation

2-18

Chapter 2: Getting started

The following two items appear only when you set the HD Audio Device item to [Enabled].

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

definition audio depending on the audio standard that the front panel audio module supports.
[HD] 

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

Allows you to select the digital audio output type. Configuartion options: [SPIDF] [HDMI]

[Enabled] 

Enables the Realtek LAN controller.

[Disabled] 

Disables the controller.

This item appears only when you set the previous item to [Enabled] and allows you to 

enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options: 

[Enabled] [Disabled]

[Enabled] 

Enables the onboard USB 3.0 controller.

[Disabled] 

Disables the controller.

This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled] 

Enables the Asmedia USB 3.0 battery charging function.

[Disabled] 

Disables this function.

[Enabled] 

Enables the Wi-Fi controller.

[Disabled] 

Disables the controller.

[Enabled] 

Enables the Bluetooth controller.

[Disabled] 

Disables the controller.

[Disabled] 

Disables the Energy Using Products (EuP) Ready function.

[Enabled] 

 Allows BIOS to switch off some power at S5 state to get the system ready 

for the EuP requirement. When set to [Enabled], all other PME options will 

be switched off.