ASUS VN279Q Mode D'Emploi

2-4

Chapter 2: Setup

•. To.connect.the.VGA/HDMI.(MHL)/DisplayPort.cable: 

a.  Plug one end of the VGA/HDMI (MHL)/DisplayPort cable to the 

monitor’s VGA/HDMI (MHL)/DisplayPort jack.

b.  Connect the other end of the VGA/HDMI (MHL)/DisplayPort cable to 

your computer or mobile device's VGA/HDMI (MHL)/DisplayPort jack.

c.  Tighten the two screws to secure the VGA connector.

•. To.connect.the.audio.cable:.connect one end of the audio cable to the 

monitor’s Audio-in port, the other end to the computer’s audio-out port.

•. To.use.the.earphone: connect the end with plug type to the monitor’s 

earphone jack when an HDMI or DisplayPort signal is fed.

When these cables are connected, you can choose the desired signal 

from the Input Select item in the OSD menu.

Press the power button   . See page 1-2 for the location of the power button. The 
power indicator   lights up in white to show that the monitor is ON.