ASUS PA279Q Mode D'Emploi

2-3

ASUS PA279 Series LCD Monitor

1.  Connect the cables as the following instructions:

•. To.connect.the.power.cord: connect one end of the power cord securely to

the monitor’s AC input port, the other end to a power outlet.

•. To.connect.the.HDMI/DVI/DisplayPort.cable:

a.  Plug one end of the HDMI/DVI/DisplayPort cable to the monitor’s HDMI/

DVI/DisplayPort jack.

b.  Connect the other end of the HDMI/DVI/DisplayPort cable to your

computer's HDMI/DVI/DisplayPort jack.

c.  Tighten the two screws to secure the DVI connector.

•. To.use.the.earphone: connect the end with plug type to the monitor’s

earphone jack when an HDMI or DisplayPort signal is fed.

•. To.use.the.USB.3.0.ports: Take the supplied USB 3.0 cable, and plug

the smaller end (type B) of the USB upstream cable to the monitor’s USB

upstream port, and the larger end (type A) to your computer’s USB 3.0 port.

Make sure your computer is installed with the lastest Windows 7/Windows 8

operating system. That will enable the USB ports on the monitor to work.

When these cables are connected, you can choose the desired signal

from the Input Select item in the OSD menu.

Press the power button   . See page 1-2 for the location of the power button. The
power indicator   lights up in white to show that the monitor is ON.